HP 6500 Series Guide de l'utilisateur télécharger pdf (Page 30)

Maintain the printer

This section provides instructions for keeping the printer in top working condition.

Perform these maintenance procedures as necessary.

•

Clean the scanner glass

•

Clean the exterior

•

Clean the automatic document feeder (ADF)

Clean the scanner glass

NOTE: Dust or dirt on the scanner glass, scanner lid backing, or scanner frame

can slow down performance, degrade the quality of scans, and affect the accuracy

of special features such as fitting copies to a certain page size.

To clean the scanner glass

1. Turn the printer off. For more information, see

Turn off the printer.

2. Lift the scanner lid.

3. Clean the glass by using a soft, lint-free cloth that has been sprayed with a mild

glass cleaner. Dry the glass with a dry, soft, lint-free cloth.

CAUTION: Use only glass cleaner to clean the scanner glass. Avoid cleaners

that contain abrasives, acetone, benzene, and carbon tetrachloride, all of which

can damage the scanner glass. Avoid isopropyl alcohol because it can leave

streaks on the glass.

CAUTION: Do not spray the glass cleaner directly on the glass. If too much

glass cleaner is applied, the cleaner could leak under the glass and damage the

scanner.

4. Close the scanner lid, and turn on the printer.

Clean the exterior

WARNING! Before cleaning the printer, turn off the power and unplug the power

cord from the electrical socket.

Chapter 1

26 Get started

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 249 250

Pas de commentaire

HP 6500 Series Guide de l'utilisateur Page 30