HP E1351A/53A Manuel d'utilisateur télécharger pdf (Page 57)

ARM

The ARM subsystem selects the number of scanning cycles (1 - 32767) for

each

INIT command. This command does not apply to downloaded scan

lists. For downloaded scan lists, use

INIT:CONT ON for multiple scans.

Subsystem Syntax ARM

:COUNt <

number> MIN | MAX

:COUNt? [MIN | MAX]

:COUNt ARM:COUNt <number> MIN | MAX allows scanning cycles to occur a

multiple of times (1 to 32767) with one

INITiate command and when

INITiate:CONTinuous OFF | 0 is set. MIN sets 1 scanning cycle and MAX

sets 32,767 scanning cycles.

Parameters

Parameter Name Parameter Type Range of Values

number

Numeric 1 - 32767 | MIN | MAX

Comments • Number of Scans: Use only numeric values between 1 to 32767 for

the number of scanning cycles (default is 1).

• Related Commands: ABORt, INITiate[:IMMediate]

• *RST Condition: ARM:COUNt 1

Example Setting Ten Scanning Cycles

ARM:COUN 10 Set 10 scanning cycles.

SCAN (@100:115) Sets channel list.

INIT Starts scanning cycle.

:COUNt? ARM:COUNt? [MIN | MAX] returns the current number of scanning cycles

set by

ARM:COUNt. ARM:COUN? MIN returns 1 and ARM:COUN? MAX

returns 32767.

Parameters

Parameter Name Parameter Type Range of Values

MIN | MAX Numeric MIN = 1, MAX = 32767

Comments • Related Commands: INITiate[:IMMediate]

Example Query Number of Scanning Cycles

ARM:COUN 10 Sets 10 scanning cycles.

ARM COUN? Query number of scanning cycles;

returned value is 10.

Chapter 5 HP E1351A/53A 16-Channel FET Multiplexer Command Reference 57

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 106 107

Pas de commentaire

HP E1351A/53A Manuel d'utilisateur Page 57