HP E1351A/53A Manuel d'utilisateur télécharger pdf (Page 59)

:MONitor[:STATe] DISPlay:MONitor[:STATe] <mode> turns the monitor mode on or off.

Parameters

Parameter Name Parameter Type Range of Values

mode

Boolean 0 | 1 | ON | OFF

Comments • Monitoring Switchbox Channels: DISPlay:MONitor[:STATe] ON

or DISPlay:MONitor[:STATe] 1 turns the monitor mode on to show

the channel state of the selected module.

DISPlay:MONitor[:STATe]

OFF

or DISPlay:MONitor[:STATe] 0 turns the monitor mode off.

• Selecting the Module to be Monitored: Use the DISPlay

MONitor:CARD <

number> | AUTO command to select the module.

• Monitor Mode on an HP 1301 Mainframe Display: The

following three examples show the types of display you will get:

Chan: _ No channels closed on this card.

Chan: 12 Channel 12 closed.

Chan: 9,1 4-wire ohms set-up with voltage on

channel 9.

• *RST Condition: DISPlay:MONitor[:STATe] OFF | 0

Example Enabling the Monitor Mode

DISP:MON:CARD 2 Selects module #2 in a switchbox.

DISP:MON 1 Turns the monitor mode on.

Chapter 5 HP E1351A/53A 16-Channel FET Multiplexer Command Reference 59

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 106 107

Pas de commentaire

HP E1351A/53A Manuel d'utilisateur Page 59