HP 10TB Guide de l'utilisateur télécharger pdf (Page 96)

7. Complete the following (Figure 66 (page 96)):

a. Remove the two screws from the bracket of the failed PCIe module (1).

b. Remove the bracket (2).

c. Remove the PCIe card from the failed module (3).

Figure 66 Removing the PCIe card

Replacing the PCIe module

1. Install the PCIe card in the replacement module (1, Figure 67 (page 96)), replace the bracket

(2), and then reinsert the two screws into the bracket of the replacement module (3).

Figure 67 Installing the PCIe card

2. Insert the replacement PCIe module into the system (1, Figure 68 (page 97)), and lock the

release lever (2).

NOTE: The PCIe module should be inserted with the lever in the open position.

96 Removing and replacing hardware components

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 180 181

Pas de commentaire

HP 10TB Guide de l'utilisateur Page 96