HP Designjet Universal Print Driver Manuel d'utilisateur télécharger pdf (Page 85)

2. Click Settings. There are two tabs in the settings screen: General and Device Verification tabs.

General tab—To specify if and when you will receive the HP Universal Printing dialog box when you are

printing, select one of the following options:

 Always prompt for the printer when printing a job.

The HP Universal Printing dialog box displays every time HP Universal Printing is the selected printer. You

can select a destination printer in this dialog box.

 Only prompt the first time a job is printed from an application.

The HP Universal Printing dialog box displays the first time HP Universal Printing is selected as the printer

from an application. This option is helpful if other print jobs from that application are sent to the same printer

by reducing the number of key clicks required by the user.

 Only prompt if the last known printer is no longer available.

The HP Universal Printing dialog box displays if the last used printer is no longer available.

Figure 7-4 HP UPD Dynamic Mode dialog box Device Verification tab

Device Verification tab—To set the level of verification required to allow printing, select one of the following in

the Device Verification tab:

 Verify bidirectional communication with device and language compatibility with driver (High) to block printing if

bidirectional communication and language compatibility cannot be verified.

 Verify Device ID and Model Name can be obtained from port (Medium) to block printing if the Product ID and

Model Name cannot be verified. Medium is the default setting.

 Verify port can be opened for printing (Low) to allow printing (but issue a warning message) if the port can be

opened for printing.

3. Click OK.

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 300 301

Pas de commentaire

HP Designjet Universal Print Driver Manuel d'utilisateur Page 85