HP PROCURVE 6600 Manuel d'utilisateur télécharger pdf (Page 170)

100

101

Interface Access and System Information

Interface Access: Console/Serial Link, Web, and Inbound Telnet

Syntax: [no] telnet-server [listen <oobm | data | both>]

Enables or disables inbound Telnet access on a switch.

Use the

no version of the command to disable inbound Telnet

access.

The

listen parameter is available only on switches that have a

separate out-of-band management port. Values for this

parameter are:

•

oobm — inbound Telnet access is enabled only on

the out-of-band management port.

•

data — inbound Telnet access is enabled only on

the data ports.

•

both — inbound Telnet access is enabled on both

the out-of-band management port and on the data

ports. This is the default value.

Refer to Appendix I, “Network Out-of-Band Management” in

this guide for more information on out-of-band management.

The

listen parameter is not available on switches that do not

have a separate out-of-band management port.

To disable inbound Telnet access:

ProCurve(config)# no telnet-server

To re-enable inbound Telnet access:

ProCurve(config)# telnet-server

Outbound Telnet to Another Device. This feature operates indepen-

dently of the telnet-server status and enables you to Telnet to another device

that has an IP address.

7-6

1 2 ... 165 166 167 168 169 170 171 172 173 174 175 ... 853 854

Commentaires sur ces manuels

Pas de commentaire

HP PROCURVE 6600 Manuel d'utilisateur Page 170

Commentaires sur ces manuels

Produits connexes et manuels pour Logiciel HP PROCURVE 6600