HP PROCURVE 6600 Manuel d'utilisateur télécharger pdf (Page 658)

100

101

Monitoring and Analyzing Switch Operation

Traffic Mirroring

For this reason, ProCurve strongly recommends that you first configure the

exit switch in a remote mirroring session, as described in “2. Configure a

Mirroring Destination on a Remote Switch” on page B-50 and “3. Configure a

Mirroring Session on the Source Switch” on page B-52, before you apply a

mirroring service policy on a port or VLAN interface.

The following restrictions apply to a mirroring service policy:

■ Only one mirroring policy is supported on a port or VLAN interface.

■ If you apply a mirroring policy to a port or VLAN interface on which a

mirroring policy is already configured, an error message is displayed. The

new policy does not overwrite the existing one. To apply a new policy, you

must first remove the existing policy with the no interface service-policy in

or no vlan service-policy in command.

■ A mirroring policy is supported only on inbound traffic.

Because only one mirroring policy is supported on a port or VLAN interface,

ensure that the policy you want to apply contains all the required classes and

actions for your configuration.

To apply a mirroring policy on a port or VLAN interface, enter one of the

following service-policy commands from the global configuration context.

Context: Global configuration

Syntax: interface <port-list > service-policy <policy-name > in

Configures the specified port(s) with a mirroring policy that

is applied to inbound traffic on each interface.

Separate individual port numbers in a series with a comma;

for example, a1, b4, d3. Enter a range of ports by using a dash;

for example, a1-a5.

The mirroring policy name you enter must be the same as

the policy name you configured with the policy mirror

command in Step 2.

Syntax: vlan <vlan-id > service-policy <policy-name > in

Configures a mirroring policy on the specified VLAN that is

applied to inbound traffic on the VLAN interface.

Valid VLAN ID numbers range from 1 to 4094.

The mirroring policy name you enter must be the same as

the policy name you configured with the policy mirror

command in Step 2

B-72

1 2 ... 653 654 655 656 657 658 659 660 661 662 663 ... 853 854

Commentaires sur ces manuels

Pas de commentaire

HP PROCURVE 6600 Manuel d'utilisateur Page 658

Commentaires sur ces manuels

Produits connexes et manuels pour Logiciel HP PROCURVE 6600