Hp StorageWorks XP Remote Web Console Software Manuel d'utilisateur télécharger pdf (Page 116)

Changing Option

s for Logical Paths and Storage Systems

The DKC Option window (see Figure 51 on page 116) allows you to set the logical path options and

storage system options. These options will apply to the local storage system and the corresponding

remote storage

system.

To change logic

al path options and storage system options, follow the procedure below. Not only the

primary stora

ge system administrator but also the secondary storage system administrator can perform

this operation:

1. Ensure that the XP Remote Web Console main window is in Modify mode.

For detailed i

nformation about how to do this, please refer to XP Remote Web Console User’s Guide.

2. Ensure that the DKC Operation window is displayed.

3. In Display, select DKC.

4. Select LDKC f

rom the tree.

Thelistdisplaysalist of remote storagesystems.

5. From thelist, select andright-click thedesired remote storagesystem,

6. From the pop

-up menu, select DKC Operation and Change DKC Option.

The DKC Option window appears (Figure 51 on page 116).

7. On the DKC Option window, change the options as desired. For detailed information about the

options, refer to explanations below Figure 51 on page 116.

8. Select Set to close the DKC Option window.

9. See the Pre

view list to check the settings that you have made.

• If you want to modify a setting, select and right-click the setting from the Preview list and then

select Modify. A window appears and allows you to modify the setting.

• If you want to cancel a setting, select and right-click the setting in the Preview list and then

select Ca

ncel.

10. Select Apply to apply the settings that you have made. If an error occurs, the rightmost column of

the Preview list displays the error code. To view detailed information about the error, right-click

the error code and then select Error Detail. Anerror message appearsand givesyou detailed

information about the error.

Figure 51 DKC Option Window

The DKC Option window displays the following:

• The Minimum Paths option speciﬁes the minimum number of paths required for each remote

storage system connected to the local storage system (default = 1).

NOTE:

You cannot change the Minimum Paths for the current version.

• The I/O missing interrupt handler (RIO MIH) Time setting speciﬁes the RIO MIH timer value,

which is the wait time until data transfer from the local storage system to the remote storage

11 6

Conﬁguring Disk Storage Systems and Logical Paths

1 2 ... 111 112 113 114 115 116 117 118 119 120 121 ... 218 219

Commentaires sur ces manuels

Pas de commentaire

Hp StorageWorks XP Remote Web Console Software Manuel d'utilisateur Page 116

Commentaires sur ces manuels

Produits connexes et manuels pour Stockage Hp StorageWorks XP Remote Web Console Software