Hp NonStop G-Series Manuel d'utilisateur télécharger pdf (Page 120)

5157/5157 ACL S-Series DLT Subsystems Installation Users Guide

Operating the 5157 ACL Tape Drive 6-31

6.22 Loading and Unloading Tapes

The Load/Unload menu enables the operator to specify a source

and a destination for a cartridge movement. As a result, the

procedure to load is the same for unloading. To load or unload a

tape from the front panel of the module, use the Load/Unload

menus as follows:

DLT1 IdleDLT1 Idle

Loader IdleLoader Idle

11AAyy--------------------------ÿÿ1010

Figure 6-24 Default Screen

A default screen is shown in Figure 6-24. Note that DLT1 has a

tape loaded. When this screen indicates DLT1 Idle, it means that

the drive has a cartridge loaded and is awaiting instructions. Note

also that slot 1 of the magazine has a cartridge present, while the

remaining slots are empty.

From the Default Screen, enter the Menu Mode by pressing the

Enter button. The Main Menu shown in Figure 6-25 appears.

Note: If the control panel has been locked, the screen shown in

Figure 6-9 appears. If the unlock code is unknown, contact the

system administrator.

÷÷Load/UnloadLoad/Unload

Unlock DoorUnlock Door

Show Status MenuShow Status Menu

Maintenance Menu Maintenance Menu êê

Figure 6-25 Main Menu

1 2 ... 115 116 117 118 119 120 121 122 123 124 125 ... 180 181

Pas de commentaire

Hp NonStop G-Series Manuel d'utilisateur Page 120