HP Web Jetadmin Software Manuel d'utilisateur télécharger pdf (Page 412)

NOTE: The resolution setting cannot be changed by the user.

To congure this option, select the quality of outbound faxes from the Resolution drop-down list.

Fax Ring Burst O Time

Use this option to specify a the amount of time between rings that must elapse before the modem can detect an

incoming ring (or, Ring Burst O Time). You may want to specify a custom value for Ring Burst O Time if you use

the fax line for multiple purposes and only want the fax answering for a specic ring duration.

To congure this option, select Enable Custom Ring Burst O Time and then type the value in milliseconds in

Ring Burst O Time.

Fax Ring Frequency

Use this option to specify a particular frequency for the fax ring. You may need to specify a custom value in order

to x oscillations generated by a custom PBX policy. This option might be required by technical support to adjust

the fax ring communication.

NOTE: Change this setting only when directed by an HP technical support agent.

To congure this option, select Enable custom ring frequency and then type a numeric value.

Fax Send

This option lets you specify the most ecient settings for sending faxes from the digital send device. These

settings aect how the device dials outbound faxes and how it behaves when the receiving line fails to answer

the fax. These settings will ensure that the majority of the outbound faxes are received successfully while

minimizing time spent attempting to send faxes to unreachable recipients.

Use the following steps to congure this option:

1. Select the dialing mode from the Dialing mode drop-down list.

2. To have the fax wait for a dial tone before dialing for an outbound fax document, select Yes from the

Detect dial tone drop-down list.

3. Select the number of retry attempts when the receiving line is busy from the Redial on busy drop-down

list.

4. Select the number of retry attempts when the receiving line fails to answer from the Redial on no answer

drop-down list.

5. Select the number of minutes to wait between retry attempts from the Redial interval drop-down list.

Fax Send - Dialing Mode

This option lets you sets the default dialing mode for dialing a number on a fax send (Tone or Pulse). This lets

you select the dialing mode that suits the characteristics of the available communication line.

To congure this option, select the radio button for the dialing mode.

386 Chapter 6 Device Conguration Options ENWW

1 2 ... 407 408 409 410 411 412 413 414 415 416 417 ... 491 492

Pas de commentaire

HP Web Jetadmin Software Manuel d'utilisateur Page 412