HP Embedded Firewall Series Manuel d'utilisateur télécharger pdf (Page 17)

Windows NT 4.0 Driver Installation

This chapter explains the following tasks on a computer running Windows NT 4.0:

• Install the network driver and NIC software using the 3Com Installation CD.

• Verify the network driver installation.

To obtain the latest version of a driver, go to:

http://www.3com.com/

Search for “3CR990B” and “drivers.” The network driver can be used in both Microsoft

and NetWare network environments.

Installing the Network Driver

Before you begin, make sure that:

• All installation requirements are met. See “Minimum Installation Requirements” on

page 1.

• The NIC is installed. See “Installing and Connecting the NIC” on page 3.

• You have Network Administrator privileges.

To install the driver:

1 Turn on the power to the PC.

2 Double-click the My Computer icon, the Control Panel icon, and then the Network

icon.

3 Select the Adapters tab.

4 Click Add.

The Select Network Adapter dialog box appears.

5 Click Have Disk.

The Insert Disk dialog box appears.

6 Insert the 3Com Installation CD in the CD-ROM drive.

If the main menu appears, click Exit.

7 At the OEM Option dialog box, type in the path of the CD and then click OK.

8 Make sure the 3Com NIC is selected, and then click OK.

If this is the first time setting up the network, Windows may prompt you to click Next

to continue setting up the protocol and services.

Files are copied. Windows may prompt you for the Windows NT specific files. These

are typically located in C:\I386.

9 Click OK on any dialog boxes that may appear.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 85 86

Pas de commentaire

HP Embedded Firewall Series Manuel d'utilisateur Page 17