HP Embedded Firewall Series Manuel d'utilisateur télécharger pdf (Page 65)

Windows 98 SE

6 Depending on whether you are removing the NIC or reinstalling NIC software, do the

following:

• If you are physically removing the NIC from the computer, click No. Do not restart

the computer until you shut down the system, turn the power off, and remove the

NIC from the computer.

• If you are reinstalling the NIC software, click Yes to restart the computer.

Windows 98 SE

To remove the network driver:

1 Double-click the My Computer icon, then the Control Panel icon, and then the

System icon.

2 Click the Device Manager tab.

3 Double-click Network adapters.

4 Select the name of the NIC.

5 Click Remove.

6 Click OK to confirm the device removal.

You are prompted to restart the computer.

If you are physically removing the NIC from the computer, click No. Do not restart the

computer until you shut down the system, turn the power off, and remove the NIC

from the computer.

If you are reinstalling the NIC software, click Yes to restart the computer.

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 85 86

Pas de commentaire

HP Embedded Firewall Series Manuel d'utilisateur Page 65