HP Embedded Firewall Series Manuel d'utilisateur télécharger pdf (Page 41)

Creating a Group

Windows 2003, Windows XP, and Windows 2000

Access 3Com Advanced Server server features through the Windows Network and Dial-up

Connections window as follows:

1 Log in to Windows with administrator privileges.

2 Launch the Windows Network and Dial-up Connections window.

3 Select a Local Area Connection icon.

4 Click the right mouse button and select Properties.

The Local Area Connections Properties window appears.

5 Click the General tab.

6 In the General window, select DynamicAccess Protocol and click Properties.

The DynamicAccess Protocol Properties window appears. Click the appropriate tab to

configure server features.

Windows NT

Start 3Com Advanced Server features under Windows NT as follows:

1 Log in to the Windows NT Administrator account.

2 From the Windows Start menu, select Settings/Control Panel.

3 Double-click the DynamicAccess SW Server icon.

The DynamicAccess Resilient Server Link/Load Balance/VLAN Configuration window

appears. Click the appropriate tab to configure server features.

Creating a Group

1 Click the Load Balance/RSL tab.

2 In the Load Balance/RSL window, click Create Group.

3 In the Create Group dialog box, type a group name.

4 Set the load balancing:

To enable transmit load balancing—Clear the Receive Load Balance Enabled

check box and check the Transmit Load Balance Enabled box.

To enable bidirectional load balancing—Check both the Transmit Load Balance

Enabled box and the Receive Load Balance Enabled box. Enter only the Host ID bytes

required for a dedicated IP address. For example:

See “Specifying a Dedicated IP Address” on page 36 for more information on the

dedicated IP address.

Byte 1Byte 2Byte 3Byte 4

Class A Network ID Host ID

24 1 253

Class B Network ID Host ID

2 253

Class C Network ID Host ID

253

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 85 86

Pas de commentaire

HP Embedded Firewall Series Manuel d'utilisateur Page 41