HP Embedded Firewall Series Manuel d'utilisateur télécharger pdf (Page 19)

Windows 98 SE Driver Installation

This chapter explains the following tasks on a computer running Windows 98 SE:

• Install the network driver and NIC software using the 3Com Installation CD.

• Verify the network driver installation.

To obtain the latest version of a driver, go to:

http://www.3com.com/

Search for “3CR990B” and “drivers.” The network driver can be used in both Microsoft

and NetWare network environments.

Installing the Network Driver

To install the driver:

1 Make sure that the NIC is installed in the computer, as described in “Installing and

Connecting the NIC” on page 3.

2 Turn on the power to the computer.

3 Insert the 3Com Installation CD in the CD-ROM drive.

If the main menu appears, click Exit.

Windows detects the NIC. The Add New Hardware Wizard starts and detects a new

Ethernet Controller.

4 Click Next.

Windows prompts you to search for the best driver for your device.

5 Select Search for the best driver for your device (Recommended), and then click Next.

6 Make sure CD-ROM drive is selected, and then click Next.

Windows detects the driver.

7 Click Next.

8 Click Finish.

The driver installation is complete.

9 Restart the computer.

Verifying the Network Driver Installation

To verify successful NIC installation:

1 Right-click My Computer and select Properties.

2 Click the Device Manager tab.

The Device Manager window appears.

3 Scroll down the list of hardware devices to Network Adapters. Click the plus sign (+)

to the left of the icon to display the list of NICs currently configured.

4 Make sure the 3Com NIC is installed and that there is not a red X or a yellow

exclamation point (!) next to the device.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 85 86

Pas de commentaire

HP Embedded Firewall Series Manuel d'utilisateur Page 19