HP Data Center Environmental Edge Manuel d'installation télécharger pdf (Page 18)

HP Base Station Gateway 18

Connect one end of the CAT5 Ethernet cable to the gateway and the other end to your network.

7. Turn on the gateway by flipping the power switch.

8. Verify that the gateway is connected to power and is working in operation mode by viewing the

gateway LED status (on page 18).

o Connected—The gateway Active LED is either flashing or solid green and the Battery LED is off.

o Not connected—The gateway Battery LED is either flashing or solid red.

Installation is complete.

Gateway LED status

The HP Base Station Gateway has the following LEDs:

• Battery LED

o Flashes red if the gateway is not connected to power and is running on batteries.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 81 82

Pas de commentaire

HP Data Center Environmental Edge Manuel d'installation Page 18