HP Jetdirect 620n Fast Ethernet Print Server Manuel d'installation télécharger pdf (Page 16)

Installation Procedures 16

ENWW

O Use the printer’s control

panel (for printers with a

supported control panel)

to configure basic network

parameters on the print

server. See

Appendix C for

more information.

O For TCP/IP networks, use an

advanced configuration method,

such as BootP, DHCP, Telnet, or

the “arp” and “ping” commands.

O Use HP printer management software (such as HP Web

Jetadmin) or other network utilities to configure network

parameters. HP printer setup and management software can be

downloaded from HP’s online support at:

http://www.hp.com/support/net_printing

Note After the print server is configured with network

parameters, the configuration values are saved and

maintained even after the printer is turned off and

back on again.

MENUS

+ XXXXXXXXXX

+ XXXXXXXXXXXX

+ XXXXXXXX

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 53 54

Pas de commentaire

HP Jetdirect 620n Fast Ethernet Print Server Manuel d'installation Page 16