HP Jetdirect 620n Fast Ethernet Print Server Manuel d'installation télécharger pdf (Page 40)

HP Jetdirect EIO Control Panel Menus 40

ENWW

CONFIG

METHOD

Specifies the method that TCP/IP

parameters will be configured on the

Jetdirect print server.

O BOOTP: Use BootP (Bootstrap

Protocol) for automatic configuration

from a BootP server.

O DHCP: Use DHCP (Dynamic Host

Configuration Protocol) for automatic

configuration from a DHCP server. If

selected and a DHCP lease exists,

DHCP RELEASE and DHCP

RENEW menus will be available to set

DHCP lease options.

O AUTO IP: Use automatic link-local IP

addressing. An address in the form

169.254.x.x will be automatically

assigned.

O MANUAL: Use the Manual Settings

option to configure TCP/IP

parameters.

DHCP RELEASE This menu appears if CONFIG METHOD

was set to DHCP and a DHCP lease for

the print server exists.

O NO (default): The current DHCP lease

is saved.

O YES: The current DHCP lease along

with the leased IP address are

released.

DHCP RENEW This menu appears if CONFIG METHOD

was set to DHCP and a DHCP lease for

the print server exists.

O NO (default): The print server does

not request to renew the DHCP lease.

O YES: The print server requests to

renew the current DHCP lease.

Table C-2. EIO Graphical Control Panel Menu (2 of 5)

Menu Item Options Description of settings

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 53 54

Pas de commentaire

HP Jetdirect 620n Fast Ethernet Print Server Manuel d'installation Page 40