
HP Jetdirect EIO Control Panel Menus 38
ENWW
CFG IPX/SPX= Selects whether you want to access the IPX/SPX menu
and set IPX/SPX protocol parameters.
O NO (default): Bypass the IPX/SPX menu items.
O YES: Access the IPX/SPX menu items.
In the IPX/SPX menu, you can specify the Frame Type
parameter used on your network.
Q AUTO (default) will automatically set and limit the frame
type to the first one detected.
Q For Ethernet cards, frame type selections include
EN_8023, EN_II, EN_8022, EN_SNAP.
CFG LINK= Selects whether you want to manually configure the
HP
Jetdirect print server’s network link.
O NO (default): Bypass the link configuration menu
items.
O YES: Access the link configuration menu items.
One of the following link configurations can be set:
Q AUTO (default): The print server will automatically
configure itself to match the network’s link speed and
communication mode. If it fails, 10T HALF or 100T HALF
is set.
Q 10T HALF: 10 Mbps, half-duplex operation.
Q 10T FULL: 10 Mbps, full-duplex operation.
Q 100T HALF: 100 Mbps, half-duplex operation
Q 100T FULL: 100 Mbps, full-duplex operation
WEB= For configuration management, specify whether the
embedded Web server will accept communications
using HTTPS (Secure HTTP) only, or both HTTP and
HTTPS.
O HTTPS: For secure, encrypted communications,
only HTTPS access is accepted. The print server
will appear as a secure site.
O HTTP/HTTPS: Access using either HTTP or
HTTPS is permitted.
SECURITY= Specify whether the current security settings on the print
server will be saved or reset to factory defaults.
O KEEP (default): The current security settings are
maintained.
O RESET: Security settings are reset to factory
defaults.
Table C-1. EIO Classic Control Panel Menu (3 of 3)
Menu Item Description
Commentaires sur ces manuels