HP Jetdirect 620n Fast Ethernet Print Server Manuel d'installation télécharger pdf (Page 36)

HP Jetdirect EIO Control Panel Menus 36

ENWW

Classic Control Panel

Classic control panels can typically display

two lines of 16 characters each.

As described in Table C-1, the HP Jetdirect

EIO control panel menu allows you to enable

or disable network protocols, and configure

selected network parameters. On the control

panel display, an asterisk (*) is used to

identify the selected value.

Table C-1. EIO Classic Control Panel Menu (1 of 3)

Menu Item Description

CFG NETWORK= Selects whether or not you want to access the Jetdirect

menu.

O NO (default): Bypass the HP Jetdirect menu.

O YES: Access the HP Jetdirect menu. You must

change this to YES* each time you want to access

the menu.

TCP/IP=

IPX/SPX=

DLC/LLC=

ATALK/ETALK=

Identifies whether the protocol stack is enabled or

disabled.

O ON (default). The protocol is enabled.

O OFF: The protocol is disabled.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 53 54

Pas de commentaire

HP Jetdirect 620n Fast Ethernet Print Server Manuel d'installation Page 36