HP E5000 Guide de l'utilisateur télécharger pdf (Page 105)

6. Label each server blade, and then remove both server blades.

7. Label and then unplug all cables from the back of the messaging system enclosure.

8. Unscrew the retaining screws from the bezel ears, and then remove the enclosure from the

rack.

WARNING! The messaging system enclosure is heavy, even after removing the hard drives.

Always use at least two people to remove the messaging system from the rack.

9. Remove the top back panel by pressing the release button and lifting the latch to slide the top

back panel off.

10. Remove the server blade airflow baffle from inside the enclosure.

Replacing the server airflow baffle

To replace the server airflow baffle:

1. Install the replacement server blade airflow baffle.

2. Reinstall the top back panel.

3. Place the enclosure back in the rack, and tighten the two retaining screws.

WARNING! The messaging system enclosure is heavy, even after removing the hard drives.

Always use at least two people to replace the messaging system in the rack.

4. Replace the server blades into their original bays.

5. Extend the hard drive drawer:

Removing and replacing the server airflow baffle 105

1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 206 207

Pas de commentaire

HP E5000 Guide de l'utilisateur Page 105