HP E5000 Guide de l'utilisateur télécharger pdf (Page 91)

Removing the HP StorageWorks Ethernet I/O module

To remove the HP StorgeWorks Ethernet I/O module in the network or Mezz slots of the system

enclosure:

1. Use System Manager to identify the failed component.

2. Verify the failed component by checking for a blinking amber LED on the failed component.

3. Label the cables, and then unplug all cables from the HP StorageWorks Ethernet I/O module.

4. Press the module release mechanism to the right (1), and then remove the failed module (2).

Replacing the HP StorageWorks Ethernet I/O module

To replace the HP StorgeWorks Ethernet I/O module in the network or Mezz slots of the system

enclosure:

1. Insert the replacement HP StorageWorks Ethernet I/O module.

2. Plug in all cables to the replacement module to their original locations.

3. Verify that the replacement component is working properly by checking the associated LED

status.

4. Confirm the firmware version.

Removing and replacing the HP StorageWorks Ethernet I/O module 91

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 206 207

Pas de commentaire

HP E5000 Guide de l'utilisateur Page 91