HP Netserver 5971-0821 Manuel d'utilisateur télécharger pdf (Page 63)

multlun_targets= 0-FFFF FFFF A bit mask to enable LUNs on

selected targets. By default,

LUNs on all targets are enabled.

This bit mask is entered in hex

(see “Bit Mask Options” on

page 58).

slot=

0-xxxx

0 Defines a physical slot number

for the host adapter. If 0 is

specified, or if this option is not

specified, then the driver loads

for all Ultra3 host adapters.

verbose= yes, no no Displays host adapter

configuration information at load

time.

a.Many multiple-LUN and removable-media devices are changers or magazines. Some of these are only

supported by the driver through an ASPI driver provided by the hardware vendor.

b.The values can vary and are dependent on the system configuration.

Option Values Default Description

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 119 120

Pas de commentaire

HP Netserver 5971-0821 Manuel d'utilisateur Page 63