HP Netserver 5971-0821 Manuel d'utilisateur télécharger pdf (Page 66)

Valid for both removable and non-removable types of SCSI disk drives.

Valid for removable media only.

Mount Status

Mounting causes a drive to come on-line as a NetWare storage device.

Dismounted drives are inactive and cannot be accessed.

Before you eject your current media, you should first Dismount it (menu choice

5). When the media status is Dismounted, you can eject the media. However,

NetWare does not allow you to dismount it if the media is locked.

To insert your new media, wait for the drive to spin-up, and then select the

Drive Mount option.

Lock Status

If your removable-media device supports the Lock/Unlock feature, you can

lock the media (menu choice 6). The media must be in the Not Locked state

before you can eject it. If the media is Locked, it cannot be ejected when you

press the Eject button.

Menu Choice Default Value

1. Volume Segments On Drive

(select for list)

2. Read After Write Verify

Hardware Level

3. Drive Light Status

Not Supported

4. Driver Operating Status

Active

5. Removable Drive Mount Status

Mounted

6. Removable Drive Lock Status

Not Locked

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 119 120

Pas de commentaire

HP Netserver 5971-0821 Manuel d'utilisateur Page 66