Hp Netserver L Server series Manuel d'utilisateur télécharger pdf (Page 125)

Chapter 13 Alternative Rack Mounting (4–Post)

119

A tension spring allows the outer-rails to compress during installation. The

outer-rails are held in place at of the front of the rack by a flat spring tab at

the rear face of the front columns. See Figures 13-2 and 13-5.

6. Repeat Steps 3 through 5 for the outer-rail assembly on the right front and rear

columns.

7. If you need to release the outer-rail assembly once installed into the rack, do

the following:

a. Place your finger inside the rail at the point shown by the arrow to release

the spring tab. See Figure 13-5.

b. Press in on the spring tab and pull the outer-rail assembly toward you at

the front of the rack. See Figure 13-5.

Spring Tab

iew Rotated 90 Degrees CCW

Figure 13-5. Releasing the Outer-Rail Assembly

1 2 ... 120 121 122 123 124 125 126 127 128 129 130 ... 139 140

Pas de commentaire

Hp Netserver L Server series Manuel d'utilisateur Page 125