Hp Netserver L Server series Manuel d'utilisateur télécharger pdf (Page 60)

Chapter 6 Installing an Additional Processor

Hook Latch

(hidden)

Step A

Tab

Tool

Latch

Processor

Socket

Figure 6-5. Placing the Heatsink on the Processor

CAUTION Ensure the left ridge on the bottom of the heatsink fits into the

groove between the processor socket and processor, while

both ridges should straddle the processor. If good contact is

not made between the processor and the heatsink, the

processor will overheat and possible damage may occur.

See Figures 6-5 and 6-6.

b. While holding the heatsink steady with one hand, push down and in toward

the center with your finger to hook the tab with the hook latch.

See Figure 6-6.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 139 140

Pas de commentaire

Hp Netserver L Server series Manuel d'utilisateur Page 60