Hp Netserver L Server series Manuel d'utilisateur télécharger pdf (Page 127)

Chapter 13 Alternative Rack Mounting (4–Post)

121

Figure 13-6. Mounting the HP Netserver

5. Slowly move the Netserver chassis into the outer-rail assemblies until the

Netserver is completely in the rack. See Figure 13-6.

The securing brackets on the front of the Netserver should stop the chassis

from going all the way into the rack.

6. Secure the Netserver chassis to the rack with captive screws.

Attaching the Front Bezel

The front bezel attaches to the HP Netserver by pivoting on two pins at the bottom

and grasping the top pins with spring latches. The middle pins force the bezel to

pivot in or out, ensuring a rotating action.

1. Position the Bezel in front of the HP Netserver LP 1000r as shown in Figure

13-7.

1 2 ... 122 123 124 125 126 127 128 129 130 131 132 ... 139 140

Pas de commentaire

Hp Netserver L Server series Manuel d'utilisateur Page 127