Hp Netserver L Server series Manuel d'utilisateur télécharger pdf (Page 37)

Chapter 4 Installing Additional Memory

CAUTION The memory modules are sensitive to static electricity and can

be easily damaged by improper handling. Do the following

when handling the accessory kit:

• Leave the memory module in the anti-static container until

you are ready to install it.

• Always use an anti-static wrist strap and a grounding mat.

• Before you remove a memory module from the anti-static

container, touch a grounded, unpainted metal surface on the

HP Netserver to discharge static electricity.

9. Remove a DIMM from its container, handling the module by its edges.

If not ready to install it, lay it on an anti-static surface until you are ready.

CAUTION Use only HP PC133 (133 MHz) buffered SDRAM DIMMs.

10. Align the notches on the DIMM with the keys on the slot. See Figure 4-3.

Retaining Latches (2)

Keys

DIMM Slot

Notches

30 Degrees

Figure 4-3. DIMM to Slot Alignment

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 139 140

Pas de commentaire

Hp Netserver L Server series Manuel d'utilisateur Page 37