Hp Netserver L Server series Manuel d'utilisateur télécharger pdf (Page 108)

Chapter 10 Configuring the HP Netserver

102

To access the Symbios SCSI Configuration Utility, refer to the following

instructions.

1. Reboot the HP Netserver.

If you are already in the boot process, you should see the following message

appear.

Press <Ctrl C> to start Symbios Configuration

Utility...

2. Press <Ctrl>+<C> keys to enter the utility.

3. Use the arrow keys to move the cursor, press Enter to select an option, and

press Esc to exit.

4. To change adapter settings:

a. Select an adapter from the list in the main menu.

b. Select Adapter Setup.

This option configures the SCSI ID setting and other advanced adapter

settings.

5. To format a hard disk or change hard disk parameters:

a. Select an adapter from the list in the main menu.

b. Select Device Selections.

c. Select the hard disk to format.

d. Select Format menu option.

CAUTION Low-level formatting of a SCSI disk drive will destroy all of

its data.

1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 145 146

Pas de commentaire

Hp Netserver L Server series Manuel d'utilisateur Page 108