Hp Netserver L Server series Manuel d'utilisateur télécharger pdf (Page 41)

Chapter 4 Installing Additional Memory

9. Align the notches on the DIMM with the keys on the slot. See Figure 4-3.

DIMM

Slot

Keys

Retaining Latches (2)

Notches

30 Degrees

Figure 4-3. Aligning the DIMM

10. Hold the DIMM at approximately 30 ° to the system board and press the

DIMM firmly and evenly into the slot until the retaining latches close.

See Figures 4-3 and 4-4.

It is important to hold the DIMM firmly with both hands and use even

pressure so as not to bend or break the DIMM connector during installation.

If the latches do not close, the DIMM is not inserted correctly.

11. Repeat Steps 7-10 to install additional DIMMs for your memory

configuration.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 145 146

Pas de commentaire

Hp Netserver L Server series Manuel d'utilisateur Page 41