Hp Netserver L Server series Manuel d'utilisateur télécharger pdf (Page 78)

Chapter 7 Rack Mounting the HP Netserver (4-Post)

Attaching the Cable Management Arm

The Cable Management Arm (CMA) allows the cables and power cord to move in

and out with the HP Netserver chassis without being accidentally disconnected.

The Cable Management Arm installation is tool-less.

1. Ensure the HP Netserver is pushed all the way into the rack.

2. Attach the Cable Management Arm to the rack:

a. Mount the outer flange of the Cable Management Arm on the pins on the

left slide rear bracket.

b. Tighten the thumbscrew on the flange to secure the Cable Management

Arm to the rack. See the example in Figure 7-8.

Rear

Bracket

Pins

Outer Flange

of CMA

Inner Flange

of CMA

Chassis Slide

Mount

Figure 7-8. Attaching the Cable Management Arm (CMA)

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 145 146

Pas de commentaire

Hp Netserver L Server series Manuel d'utilisateur Page 78