Hp Netserver L Server series Manuel d'utilisateur télécharger pdf (Page 60)

Chapter 6 Installing an Additional Processor

CAUTION Ensure that you the align pin-1 of the processor with pin-1 of

the processor socket or pin damage will occur.

9. Insert the second processor into the socket and close the ZIF lever to fully seat

the processor.

You should hear the ZIF lever click when it closes properly.

NOTE No speed switch settings are required for the supported 1.13

and 1.26 GHz processors. These processors rely on their own

internal switch settings, and not on system board switch

settings.

Pin-1

Marker

Figure 6-3. Installing the Processor on the System Board

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 145 146

Pas de commentaire

Hp Netserver L Server series Manuel d'utilisateur Page 60