Hp Netserver L Server series Manuel d'utilisateur télécharger pdf (Page 79)

Chapter 7 Rack Mounting the HP Netserver (4-Post)

3. Attach the Cable Management Arm to the HP Netserver:

a. Insert the thumbscrew on the inner flange of the Cable Management Arm

into the hole in the chassis slide mount.

b. Tighten the thumbscrew to secure the Cable Management Arm.

See Figure 7-8.

4. Extend the HP Netserver out of the rack to ensure the Cable Management

Arm moves with the chassis without binding.

5. Dress the cables in the Cable Management Arm, and then slide the HP

Netserver into the rack to verify that the cables do not bind in the tray.

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 145 146

HP Netserver LP 2000r 1
User Guide 1
(1.13 and 1.26 GHz) 1
Audience Assumptions 2
Contents 3
Front Panel 7
LED ICON Description 9
Rear Panel 10
Powering-Up the HP Netserver 12
Sleep States (ACPI) 13
Netserver 15
Replacing the Front Bezel 16
Removing the Top Cover 16
Replacing the Top Cover 17
Air Flow Guide 19
Removing the PCI Card Cage 20
Replacing the PCI Card Cage 21
Boot Priority 25
Hardware Mirroring 26
Top Connector 34
Bottom Connector 34
Installing Additional DIMMs 38
Removing DIMMs 42
IRQ Settings 46
I C Connector 47
Integrated 48
RA Board 48
Connector 48
Removing an Accessory Board 53
Primary Processor (CPU1) 56
Secondary 56
Processor 56
ZIF Lever 59
Terminator 59
Installing the Heatsink 61
(4-Post) 67
Marking Rack Columns 71
Anti-tip Foot 72
Extended 72
Screws (4) 72
(2-Post) 81
Preparing the HP Netserver 86
Mouse, and Power Supplies 93
Release Lever 96
HP Management Solutions 101
DiagTools 102
Setup (BIOS) Utility 102
Accessing the Setup Utility 103
Menu Bar 103
Using the Setup Screens 104
➢Power-On Password 106
➢Hardware Security 106
SCSI Configuration Utility 107
Overview 109
12 Troubleshooting 111
Common Installation Problems 112
Netserver Will Not Power On 113
Chapter 12 Troubleshooting 114
Resetting a Lost Password 116
Hardware Problems 117
CD-ROM Drive Does Not Work 118
SCSI Device Does Not Work 118
Replacing a Battery 119
Introduction 121
Tools Required 123
Rack Configuration Tools 123
Safety Precautions 124
Marking the Columns 125
See Figure 13-5 128
Attaching the Front Bezel 131
Cabling Rack Components 132
A Specifications 135
Appendix A Specifications 136
System Board Layout 138

Commentaires sur ces manuels

Pas de commentaire

Hp Netserver L Server series Manuel d'utilisateur Page 79

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel informatique Hp Netserver L Server series