HP VMA-series Memory Arrays Guide de l'utilisateur télécharger pdf (Page 55)

AM456-9025A HP VMA SAN Gateway Installation and Configuration Guide 55

Fibre Channel initiator identifiers (WWN) are fixed by the HBA port. If you want to restrict

LUN access to a particular initiator, you must get the appropriate the WWN from the Fibre

Channel HBAs on the client machine.

4. To verify that the initiators were added to the initiator group, return to the CLI and enter the

show igroups command.

The

show igroups command shows all initiator groups, the number of initiators within each

group, and the WWN of those initiators.

igroup create Command

The

igroup create command creates an initiator group and, optionally, one or more Fibre

Channel initiators. Fibre Channel initiator identifiers (WWNs) are generated automatically by an

HBA.

Syntax

[no] igroup create name <name>

Syntax Description

Examples

The following examples demonstrate how the

igroup create command can be used to manage

initiator groups and initiators.

The following command creates an initiator group named FINANCE:

The Cisco-style

no prefix may be used to delete initiator groups or initiators. In the following

example, the command deletes the igroup FINANCE.

(config) # exit

# show igroups

Initiator group: <my_igroup> #Initiators: 2

wwn.21:00:00:1b:32:9a:18:65

wwn.21:01:00:1b:32:ba:18:65

name

The name is alphanumeric only.

igroup create name FINANCE

no igroup create name FINANCE

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 82 83

Pas de commentaire

HP VMA-series Memory Arrays Guide de l'utilisateur Page 55