HP VMA-series Memory Arrays Guide de l'utilisateur télécharger pdf (Page 60)

60 HP VMA SAN Gateway Installation and Configuration Guide AM456-9025A

lun export Command

The

lun export command enables you to export the LUNs within a specific container to an

initiator or initiator group. A single LUN may be exported multiple times through different target

ports (multipathing) or to different initiators (shared access).

Syntax

[no] lun export container <container_name> name <lun_name> [lunid][to

<igroup | initiator>]... [using <port …>]

Syntax Description

Optimizing Connectivity to Storage Arrays for Windows

Depending on the Windows operating system, client machines connected to the VMA SAN

Gateway should use the Microsoft® Multipath I/O (MPIO) driver for optimal storage array

connectivity. Install the appropriate driver for your operating system.

Windows Server 2008 R2 and Above

Install the Microsoft MPIO driver. MPIO is not installed by default. Use the following link for

installation instructions.

Installing and Configuring MPIO for Windows Server 2008 R2:

http://technet.microsoft.com/en-us/library/ee619752(WS.10).aspx

In HA configurations, you must ensure a proper MPIO operation when a HP VMA SAN Gateway

failure occurs.

lun_name

The lun_name could be wildcard specified, such as

FINANCE*

container <container_ID>

Name of the container.

name <lun_name>

Name of the LUN.

lunid

Designates the LUN ID assigned to an exported LUN.

By default, LUN IDs are automatically assigned by

vSHARE. User-defined LUN IDs may be specified to

track specific LUNs.

igroup

The name of the igroup.

If no igroup or initiator is specified, all initiators will

have access to the LUN.

initiator

The WWN (Fibre Channel) name of the initiator.

port

The port is Fibre Channel wwn ID.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 82 83

Pas de commentaire

HP VMA-series Memory Arrays Guide de l'utilisateur Page 60