Chapter 14 Configuring IPSec VPN OfficeConnect Gigabit VPN Firewall User’s Manual
90
Figure 14.5. Intranet VPN Policy Configuration on ISR1
Step 1: Configure VPN connection rules
Refer to the section 14.2 Establish VPN Connection Using Automatic Keying to
configure VPN policies on ISR1 using automatic keying.
Step 2: Configure Firewall rules
1. Configure outbound Firewall rule to allow packets from
192.168.1.0/255.255.255.0 to 192.168.2.0/255.255.255.0 without
any NAT
2. Configure inbound Firewall rule to allow packets from
192.168.2.0/255.255.255.0 to 192.168.1.0/255.255.255.0 without
any NAT.
Table 14.2 and Table 14.3 provide the parameters to be configured for the
outbound and inbound Firewall rule fields. For a general description on
configuring any inbound/outbound Firewall rule, please refer to sections 11.3 and
11.4.
Table 14.2. Outbound Un-translated Firewall Rule for VPN Packets on ISR1
Note: The outbound Un-translated Firewall rule has to be added the existing rule
ID 1001.
Table 14.3. Inbound Un-translated Firewall Rule for VPN Packets on ISR1
Commentaires sur ces manuels