HP OfficeConnect Firewall Series Manuel d'utilisateur télécharger pdf (Page 105)

OfficeConnect VPN Firewall User’s Manual Chapter 14. Configuring IPSec VPN

Field

Value

Destination IP

Type

Subnet

Address

192.168.1.0

Mask

255.255.255.0

NAT

None

Action

Allow

14.4.1.2 Configure Rules on OfficeConnect Gigabit VPN Firewall

2 (ISR2)

Step 1: Configure VPN connection rules

Refer to the section 14.2 Establish VPN Connection Using Automatic Keying to

configure VPN policies on ISR2 using automatic keying.

Figure 14.6. Intranet VPN Policy Configuration on ISR2

Step 2: Configure Firewall rules

1. Configure outbound Firewall rule to allow packets from

192.168.2.0/255.255.255.0 to 192.168.1.0/255.255.255.0 without

any NAT.

2. Configure inbound Firewall rule to allow packets from

192.168.1.0/255.255.255.0 to 192.168.2.0/255.255.255.0 without

any NAT.

Table 14.4 and Table 14.5 provide the parameters to be configured for the

outbound and inbound Firewall rule fields. For a general description on

1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 155 156

Pas de commentaire

HP OfficeConnect Firewall Series Manuel d'utilisateur Page 105