HP OfficeConnect Firewall Series Manuel d'utilisateur télécharger pdf (Page 60)

Chapter 9. Configuring Routes OfficeConnect VPN Firewall User’s Manual

Figure 9.2 RIP Configuration Page

9.2.1 Enabling/Disabling RIP

Follow these instructions to enable or disable RIP:

1. Click Network Routing submenu and click ―RIP‖ tab, click the ―Yes‖

or ―No‖ radio button in ―Enable RIP‖ field depending on whether you

want to enable or disable RIP.

2. Select RIPv1 or RIPv2 from the ―RIP Version‖ drop-down list.

3. If automatic route summarization is required, click ―Auto-Summary‖

option box.

4. If authentication for RIPv2 is required, select ―Yes‖ button in the

Authentication field and enter ―First Key Parameters‖ and ―Second

Key Parameters‖ in the specified fields.

5. Click to enable or disable RIP.

9.3 Static Routing

9.3.1 Static Route Configuration Parameters

The following table defines the available configuration parameters for static

routing configuration.

Table 9.1 Static Route Configuration Parameters

Field

Description

Route Name

Specifies route name for a specific static route entry.

Destination

Address

Specifies the IP address of the destination computer or

an entire destination network. It can also be specified as

all zeros to indicate that this route should be used for all

destinations for which no other route is defined (this is the

route that creates the default gateway). Note that

destination IP must be a network ID. The default route

uses a destination IP of 0.0.0.0. Refer to Appendix 18 for

an explanation of network ID.

Subnet Mask

Indicates which parts of the destination address refer to

the network and which parts refer to a computer on the

network. Refer to Appendix 18, for an explanation of

network masks. The default route uses a netmask of

0.0.0.0.

Private

Select Private if this static route entry will not be

advertised in RIP.

Interface

Specifies the interface which is the physical network

interface through which route is accessible.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 155 156

Commentaires sur ces manuels

Pas de commentaire

HP OfficeConnect Firewall Series Manuel d'utilisateur Page 60

Commentaires sur ces manuels

Produits connexes et manuels pour Logiciel HP OfficeConnect Firewall Series