HP OfficeConnect Firewall Series Manuel d'utilisateur télécharger pdf (Page 55)

OfficeConnect VPN Firewall User’s Manual Chapter 8. Configuring WAN Settings

1. Please make the ―Login Required‖ checkbox checked as shown in

Figure 8.1.

2. If you are connecting to the Internet using PPTP, you have to enter

User Name and Password in the specified fields.

3. Enter a valid PPTP IP address in the PPTP Server IP Address field.

4. If the IP address of WAN interface is automatically assigned by your

ISP, select ―DHCP‖ radio button in the Connection Mode field.

Otherwise, select ―Static IP Address‖ button and enter valid IP

address, Subnet mask and Gateway IP address in the specified

fields.

5. (Optional) If you like to use DNS setting provided by your ISP, please

select ―Get Automatically from ISP‖ radio button. Otherwise, select

―Use These DNS Servers‖ radio button and enter IP addresses for

the primary and secondary DNS servers.

6. Click to save the PPTP settings when you are done

with the configuration. You’ll see a summary of the WAN

configuration at the bottom half of the configuration page. Note that if

the default gateway address is not shown immediately, click on the

WAN menu to open the WAN configuration page again.

8.4 Dynamic IP

8.4.1 WAN Dynamic IP Configuration Parameters

Table 8.3 describes the configuration parameters available for dynamic IP

connection mode.

Table 8.3 WAN Dynamic IP Configuration Parameters

Field

Description

Field

Description

Primary/

Secondary DNS

IP address of the primary and/or secondary DNS are

optional as DHCP client will automatically obtain the DNS

IP addresses configured at your ISP. However, if there

are other DNS servers you would rather use, enter the IP

addresses in the spaces provided.

MAC Cloning

The default is to use the MAC address of the WAN

interface. However, if you had registered a MAC address

previously with your ISP, you may need to enter that MAC

address here.

8.4.2 Configuring Dynamic IP for WAN

Follow the instructions below to configure dynamic IP settings:

1. Please make the ―Login Required‖ checkbox unchecked as shown in

Figure 8.1.

2. (Optional) If you want to manually enter the DNS servers, please

click ―Use These DNS Servers‖ radio button and enter the IP

addresses for the primary and secondary DNS servers if you want to

use your preferred DNS servers; otherwise, skip this step.

3. If you had previously registered a specific MAC address with your

ISP for Internet access, click ―Use this MAC Addresse‖ radio button

and enter the registered MAC address here and make sure you

check the MAC cloning check box.

4. Click to save the Dynamic IP settings when you are

done with the configuration. You’ll see a summary of the WAN

configuration at the bottom half of the configuration page. Note that if

the default gateway address is not shown immediately, click on the

WAN menu to open the WAN configuration page again.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 155 156

Commentaires sur ces manuels

Pas de commentaire

HP OfficeConnect Firewall Series Manuel d'utilisateur Page 55

Commentaires sur ces manuels

Produits connexes et manuels pour Logiciel HP OfficeConnect Firewall Series