HP OfficeConnect Firewall Series Manuel d'utilisateur télécharger pdf (Page 31)

OfficeConnect Gigabit VPN Firewall User’s Manual Chapter 3. Quick Start Guide

7. It is recommended that you keep the default settings for DHCP

server until after you have completed the rest of the configurations

and confirm that your Internet connection is working.

8. Click on Network  IP Setup to configure the WAN settings for the

OfficeConnect Gigabit VPN Firewall.

Figure 3.9 WAN PPPoE Configuration Page

Figure 3.10 WAN Dynamic IP Configuration Page

a) PPPoE Connection Mode (see Figure 3.9)

Tick the Login Required checkbox.

Enter the user name and password provided by your ISP.

Click on the PPPoE radio button.

AC Name and Service Name are optional. You may leave it

empty if your ISP did not provide such information.

Tick the Disconnect checkbox if you want to disconnect the

PPPoE interface after the assigned idle timeout period has

elapsed.

Tick the Unnumbered checkbox to enable the PPP

unnumbered function.

You don’t need to enter primary/secondary DNS IP

addresses as PPPoE is able to automatically obtain this

information for you from your ISP. However, if you prefer to

use your favorite DNS servers, you may enter them in the

space provided.

Click on button to save the PPPoE settings.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 155 156

Pas de commentaire

HP OfficeConnect Firewall Series Manuel d'utilisateur Page 31