HP OfficeConnect Firewall Series Manuel d'utilisateur télécharger pdf (Page 53)

OfficeConnect VPN Firewall User’s Manual Chapter 8. Configuring WAN Settings

8 Configuring WAN Settings

This chapter describes how to configure WAN settings for the WAN interface on

the OfficeConnect Gigabit VPN Firewall that communicates with your ISP. You’ll

learn to configure IP address, DHCP and DNS server for your WAN in this

chapter.

8.1 WAN Connection Mode

Three modes of WAN connection are supported by the OfficeConnect Gigabit

VPN Firewall – PPPoE, PPTP, Telstra BigPond, dynamic IP and static IP. If your

WAN connection requires a login, please make the ―Login Required‖ checkbox

checked as shown in Figure 8.1.

Figure 8.1 WAN Connection Type Configuration

8.2 PPPoE

8.2.1 WAN PPPoE Configuration Parameters

Table 8.1 describes the configuration parameters available for PPPoE

connection mode.

Table 8.1 WAN PPPoE Configuration Parameters

Setting

Description

User Name and

Password

Enter the username and password you use to log into

your ISP. (Note: this is different from the information you

used to log into Configuration Manager.)

AC Name

(Optional)

If your ISP requires PPPoE AC Name, please enter the

valid AC name into this field. Leave this field blank if it is

not necessary.

Service Name

If your ISP requires Service Name, please enter the valid

Service name into this field. Leave this field blank if it is

not necessary.

Connection

Mode

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 155 156

Pas de commentaire

HP OfficeConnect Firewall Series Manuel d'utilisateur Page 53