HP 7000 dl Router Series Guide de l'utilisateur télécharger pdf (Page 131)

SROS Command Line Interface Reference Guide Enable Mode Command Set

Use the show hosts command to display information such as the domain name, name lookup service, a list

of name server hosts, and the cached list of host names and addresses on the network to which you can

Syntax Description

No subcommands.

Default Values

No default value necessary for this command.

Command Modes

# Enable Mode

Functional Notes

The list below describes the fields contained in the host table:

• Flags: Indicate whether the entry is permanent (P) or temporary (T) and if the entry is OK or expired

• Age: Indicates how old the entry is.

• Type: Shows the protocol type.

• Address: Displays the IP address for the entry.

Usage Examples

The following is sample output from the show hosts command:

Name/address lookup uses domain name service

DNS Proxy is disabled

Default domain is not set

Name servers are 1.1.1.1 2.2.2.2

Flags Age Type Address

Example1 (P OK) - - IP 1.1.1.1

Example2 (P OK) - - IP 2.2.2.2

Pas de commentaire

HP 7000 dl Router Series Guide de l'utilisateur Page 131