HP 7000 dl Router Series Guide de l'utilisateur télécharger pdf (Page 33)

100

101

SROS Command Line Interface Reference Guide Enable Mode Command Set

clear ip igmp group [<group-address> | <interface>]

Use the clear ip igmp group command to clear entries from the Internet Group Management Protocol

(IGMP) tables. If no address or interface is specified, all non-static IGMP groups are cleared with this

command.

Syntax Description

<group-address> Optional.

Specifies the multicast IP address of the multicast group.

<interface> Optional.

Designates the clearing of parameters for a specific interface (in the format

type slot/port

). For example: eth 0/1.

Default Values

No default value necessary for this command.

Command Modes

# Enable Command Mode

Usage Examples

The following example shows output for the show igmp groups command before and after a

clear ip igmp group command is issued. This example clears the IGMP entry that was registered

dynamically by a host. Interfaces that are statically joined are not cleared:

#show ip igmp groups

IGMP Connected Group Membership

Group Address

Interface

Uptime

Expires

Last Reporter

172.0.1.50

Loopback100

01:22:59

00:02:46

172.23.23.1

172.1.1.1

Ethernet0/1

00:00:14

00:02:45

1.1.1.2

172.1.1.1

Loopback100

01:22:59

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 940 941

Commentaires sur ces manuels

Pas de commentaire

HP 7000 dl Router Series Guide de l'utilisateur Page 33

Commentaires sur ces manuels

Produits connexes et manuels pour Mise en réseau HP 7000 dl Router Series