HP 7000 dl Router Series Guide de l'utilisateur télécharger pdf (Page 539)

SROS Command Line Interface Reference Guide E1 Interface Configuration Command Set

sa4tx-bit [0 | 1]

The sa4tx-bit command selects the Tx value of Sa4 in this E1 interface. Use the no form of this command

to return to the default value of 1.

Syntax Description

No subcommands.

Default Values

The default value for this command is 1.

Command Modes

(config-e1 1/1)# E1 Interface configuration mode.

Functional Notes

This command assigns a value to the Tx spare bit in position 4. The odd numbered frames of TS0 are not

used for frame alignment. Bits in position 4 through 8 are called spare bits. Values of 0 or 1 are accepted..

Usage Examples

The following example sets the Tx value of Sa4 to 0:

(config)#interface e1 1/1

(config-e1 1/1)#sa4tx-bit 0

TS0 odd frame

Bit position123 45678

Bit use 01RAI = 1SSSSS

Pas de commentaire

HP 7000 dl Router Series Guide de l'utilisateur Page 539