HP 7000 dl Router Series Guide de l'utilisateur télécharger pdf (Page 567)

100

101

SROS Command Line Interface Reference Guide Frame Relay Interface Config Command Set

FRAME RELAY INTERFACE CONFIG COMMAND SET

To activate the Frame Relay Interface Configuration , enter the interface frame-relay command at the

Global Configuration Mode prompt. For example:

Router>

enable

Router#

configure terminal

Router(config)#

interface frame-relay 1

Router(config-fr 1)#

The following commands are common to multiple command sets and are covered in a centralized section

of this guide. For more information, refer to the sections listed below:

alias <“text”> on page 923

bind <#> <from interface> <slot/port> <tdm-group#> <to interface> <slot/port> on page 924

description on page 927

do on page 928

end on page 929

exit on page 930

shutdown on page 935

All other commands for this command set are described in this section in alphabetical order.

bandwidth <value> on page 568

encapsulation frame-relay ietf on page 569

fair-queue <threshold> on page 570

frame-relay commands begin on page 571

hold-queue <queue size> out on page 583

qos-policy out <mapname> on page 584

snmp trap on page 585

snmp trap link-status on page 586

1 2 ... 562 563 564 565 566 567 568 569 570 571 572 ... 940 941

Commentaires sur ces manuels

Pas de commentaire

HP 7000 dl Router Series Guide de l'utilisateur Page 567

Commentaires sur ces manuels

Produits connexes et manuels pour Mise en réseau HP 7000 dl Router Series