HP 7000 dl Router Series Guide de l'utilisateur télécharger pdf (Page 615)

100

101

SROS Command Line Interface Reference Guide Frame Relay Sub-Interface Config Command Set

frame-relay fragment <threshold>

Use the frame-relay fragment command to set the FRF.12 fragmentation threshold. Use the no form of

this command to erase the configured threshold.

Syntax Description

<threshold> Valid fragmentation thresholds are greater than or equal to 64 and less than or

equal to 1600.

Default Values

No default value is necessary for this command.

Command Modes

(config-fr 1.1)# Virtual Frame Relay Sub-Interface Configuration Mode required

Functional Notes

For frame-relay fragmentation to take effect, rate-limiting must be enabled by setting the committed burst

rate and excessive burst rate. See

frame-relay bc <committed burst value> on page 613 and frame-relay

be <excessive burst value>

on page 614 for more information.

Usage Examples

The following example enables FRF.12 fragmentation on a sublink:

(config)#interface frame-relay 1.1

(config-fr 1.1)#frame-relay bc 64000

(config-fr 1.1)#frame-relay be 1

(config-fr 1.1)#frame-relay fragmentation 100

disables FRF.12 fragmentation on a sublink:

(config)#interface frame-relay 1.1

(config-fr 1.1)#no frame-relay fragment

1 2 ... 610 611 612 613 614 615 616 617 618 619 620 ... 940 941

Commentaires sur ces manuels

Pas de commentaire

HP 7000 dl Router Series Guide de l'utilisateur Page 615

Commentaires sur ces manuels

Produits connexes et manuels pour Mise en réseau HP 7000 dl Router Series