HP 7000 dl Router Series Guide de l'utilisateur télécharger pdf (Page 477)

100

101

SROS Command Line Interface Reference Guide Ethernet Interface Configuration Command Set

snmp trap link-status

Use the snmp trap link-status to control the SNMP variable ifLinkUpDownTrapEnable (RFC 2863) to

enable (or disable) the interface to send SNMP traps when there is an interface status change. Use the no

form of this command to disable this trap.

Syntax Description

No subcommands.

Default Values

By default, the ifLinkUpDownTrapEnable OID is enabled for all interfaces except virtual Frame Relay

interfaces.

Command Modes

(config-interface)# Interface Configuration Mode

Valid interfaces include: Ethernet, VLAN, T1 (t1 1/1), E1 (e1 1/1), DSX-1 (t1 1/2),

G.703, serial (ser 1/1), DDS (dds 1/1), virtual Frame Relay (fr 1), virtual PPP (ppp

1), SHDSL (shdsl 1/1), and loopback interfaces.

Functional Notes

The snmp trap link-status command is used to control the RFC 2863 ifLinkUpDownTrapEnable OID (OID

number 1.3.6.1.2.1.31.1.1.1.14.0).

Usage Examples

The following example disables the link-status trap on the interface:

(config)#interface ethernet 0/1

(config-eth 0/1)#no snmp trap link-status

1 2 ... 472 473 474 475 476 477 478 479 480 481 482 ... 940 941

Commentaires sur ces manuels

Pas de commentaire

HP 7000 dl Router Series Guide de l'utilisateur Page 477

Commentaires sur ces manuels

Produits connexes et manuels pour Mise en réseau HP 7000 dl Router Series