HP 7000 dl Router Series Guide de l'utilisateur télécharger pdf (Page 727)

SROS Command Line Interface Reference Guide PPP Interface Configuration Command Set

bridge-group <group#> bpduguard [enable | disable]

Use the bridge-group bpduguard command to block BPDUs from being received on this interface. To

return to the default value, use the no form of this command.

Syntax Description

<group#> Bridge group number (1 to 255) specified using the bridge-group command.

enable Enable the BPDU block.

disable Disable the BPDU block.

Default Values

By default, this command is set to disable.

Command Modes

(config-interface)# Interface Configuration Mode

Valid interfaces include: Ethernet (eth 0/1), virtual PPP interfaces (ppp 1), and

virtual Frame Relay sub-interfaces (fr 1.20)

Usage Examples

The following example enables the bpduguard on the interface:

(config)#interface ppp 1

(config-ppp 1)#bridge-group 1 bpduguard enable

Pas de commentaire

HP 7000 dl Router Series Guide de l'utilisateur Page 727