HP 7000 dl Router Series Guide de l'utilisateur télécharger pdf (Page 846)

100

101

SROS Command Line Interface Reference Guide HDLC Command Set

snmp trap link-status

Use the snmp trap link-status command to control the SNMP variable ifLinkUpDownTrapEnable

(RFC2863), which enables (or disables) the interface to send SNMP traps when there is an interface status

change. Use the no form of this command to disable this trap.

Syntax Description

No subcommands.

Default Values

By default, the ifLinkUpDownTrapEnable OID is enabled for all interfaces except virtual Frame Relay

interfaces.

Command Modes

(config-interface)# Interface Configuration Mode

Valid interfaces include: Ethernet (eth 0/1), virtual PPP interfaces (ppp 1), virtual

HDLC interfaces (hdlc 1), virtual Frame Relay sub-interfaces (fr 1.20), tunnel

interfaces (tunnel 1), and VLAN interface (vlan 1).

Functional Notes

The snmp trap link-status command is used to control the RFC2863 ifLinkUpDownTrapEnable OID (OID

number 1.3.6.1.2.1.31.1.1.1.14.0).

Usage Examples

The following example disables the link-status trap on the HDLC interface:

(config)#interface hdlc 1

(config-hdlc 1)#no snmp trap link-status

1 2 ... 841 842 843 844 845 846 847 848 849 850 851 ... 940 941

Commentaires sur ces manuels

Pas de commentaire

HP 7000 dl Router Series Guide de l'utilisateur Page 846

Commentaires sur ces manuels

Produits connexes et manuels pour Mise en réseau HP 7000 dl Router Series