HP 7000 dl Router Series Guide de l'utilisateur télécharger pdf (Page 360)

SROS Command Line Interface Reference Guide DHCP Pool Command Set

dns-server <address> <secondary>

Use the dns-server command to specify the default primary and secondary Domain Name System (DNS)

servers to use for the Dynamic Host Configuration Protocol (DHCP) client. Use the no form of this

command to remove the configured DNS server.

Syntax Description

<address> Specifies the address (in dotted decimal notation) of the preferred DNS server on

the network (example: 192.72.4.254).

<secondary> Optional. Specifies the address (in dotted decimal notation) of the second

preferred DNS server on the network (example: 192.100.4.253).

Default Values

By default, there are no specified default DNS servers.

Command Modes

(config-dhcp)# DHCP Pool

Usage Examples

The following example specifies a default DNS server with address 192.72.3.254 and a secondary DNS

server with address 192.100.4.253:

(config)#ip dhcp-server pool MyPool

(config-dhcp)#dns-server 192.72.3.254 192.100.4.253

Pas de commentaire

HP 7000 dl Router Series Guide de l'utilisateur Page 360