HP 7000 dl Router Series Guide de l'utilisateur télécharger pdf (Page 368)

100

101

SROS Command Line Interface Reference Guide DHCP Pool Command Set

network <address> [<subnet mask> or <prefix length>]

Use the network command to specify the subnet number and mask for an Secure Router OS Dynamic Host

Configuration Protocol (DHCP) server address pool. Use the no form of this command to remove a

configured subnet.

Syntax Description

<ip address> Specifies the IP address (in dotted decimal notation) of the DHCP address pool.

<subnet mask> Optional. Specifies the network mask (subnet) for the address pool. If the subnet

mask is left unspecified, the DHCP server uses the Class A, B, or C natural mask.

<prefix length> Optional. Alternately, the prefix length may be used to specify the number of bits

that comprise the network address. The prefix length must be preceded by a

forward slash ( / ). For example, to

specify an IP address with a subnet mask of 255.255.0.0, enter /16 after the

address.

Default Values

By default, there are no configured DHCP address pools.

Command Modes

Any Configuration Mode

Usage Examples

The following examples show two different ways to configure an address pool subnet of 192.34.0.0 with a

16-bit subnet mask:

(config)#ip dhcp-server pool MyPool

(config-dhcp)#network 192.34.0.0 255.255.0.0

(config)#ip dhcp-server pool MyPool

(config-dhcp)#network 192.34.0.0 /16

1 2 ... 363 364 365 366 367 368 369 370 371 372 373 ... 940 941

Commentaires sur ces manuels

Pas de commentaire

HP 7000 dl Router Series Guide de l'utilisateur Page 368

Commentaires sur ces manuels

Produits connexes et manuels pour Mise en réseau HP 7000 dl Router Series